All ways to dry the moving USB port

Do not shake the mobile

We can also come to mind to move or stir in such a way the phone in order to let it release the liquid that has entered into its interior.But, once again we would be performing a totally wrong action.The best posture for the phone will be to stand up, that is, hold it in such a way that the liquid begins to go down.So we should not let it be perched totally on a surface, since it would be more difficult to get the water to leave itself.Although, there is also the way to dry it on our own, as we will explain later.

No rice and heat

The mythical rice trick to dry a mobile that has been wet will not always be the ideal.More than anything, because rice could enter through this same port, obstructing this.So, the only thing we would get in this case would be to break it completely when we could have had a perfect opportunity to recover the USB of the smartphone.Therefore, we do not recommend trying this trick for your phone.In case your smartphone let you know that I knowed moisture, we will have other options not to immerse the phone in rice.

In addition, you should not apply heat to the port, whether using dryers, stoves or even microwaves or furnaces.This is because mobile phones have electronic circuits that could end up damaged if they are exposed to a high heat source.

Clean its port

Everything will depend on whether it has been completely wet or not.Therefore, if in your case it has been complete.Looking at the ends of the screen and all the areas that form the mobile.Although, we will have to take the battery connector as an indispensable point, through where he will receive the current.

Then, to do this cleaning or drying we recommend that you take into account any of these tricks that can work perfectly.

Compressed air spray

Many will think that blowing we can dry the USB cargo port on our own, but we are wrong, since by expelling air from our mouth we would be helping to increase its moisture, because we would be sending particles of our saliva.Therefore, the best option will be to use compressed air through a spray.This method will also serve us in case there is dirt inside.In addition to that you will have to forget to use any type of stick, because we could also damage its interior, so we will only have to use this spray pointing inside the port so that this air completely dry the device.

With a dehumidifier

This will help us to the maximum drying.And, when using a dehumidifier or an air conditioning in absorption mode, we can end any other moisture inside its interior.It will be enough to put the phone about 12 and 24 hours.Once that time has passed the terminal should be completely dry.

So now we could try to load the mobile device and check if it has resulted.In a wide number of cases, the phone will load without any problems, although it will depend on whether it has affected water to our smartphone to our smartphone.

Is it still detecting moisture?

There are many terminals that come today with a humidity sensor that will notify us in case there is water inside the port.So, if you have not served the previous methods to solve this problem, we will have to move on to these methods in which they will no longer depend so much on us.

Be patient

As much as we try to dry the device with paper at full speed, clean the holes and even introduce it in rice, we will not be able to be sure that the mobile is completely dry until a few hours pass.Depending on the time you have been in contact with water, you will need more or less time, although before a few drops it is possible that with only one hour it is sufficient.

Although if your smartphone has submerged fully, we recommend waiting for you at least 5 hours to try to load your smartphone.In addition, what is convenient will be to leave it at home in a dry area to finish eliminating all liquids through evaporation.

Let it dry alone

In most cases, when the phone is wet, one of the first steps that will be almost instinctive will be to run to dry it on the outside.To do this, the most successful thing will be to take a kitchen rag or a napkin that is superabsorbent enough to eliminate all the drops and other water that the phone could have in its different slots.

But, the truth is that it will not always work.Therefore, we will have no choice but that I walked by itself in a totally natural way without us doing anything about it.Well yes, place it vertically with the aim that the water leaves the mobile cargo port.

Extra options

In case of extreme need, we could carefully introduce a piece of toilet or kitchen paper, since they will serve to absorb a good part of the water.Although yes, we will have to put aside the attempt to insert any utensil that can damage it, since we could run out of the possibility of loading the smartphone again.

For this reason, the best option will be to use will be the use of antihumety balls.Surely they will sound to you, since they are usually found in the shoes boxes, for example.Therefore, we must try to get these balls and put them in a hermetic bag next to the wet phone.